Rexel SmartCut EasyBlade Manual De Instrucciones página 4

Specifications
Models
Product code
Sheet Capacity 80g/m
2
Integrated Paper Guide
Size Guide
Cutting Length
EasyBlade™ Cartridge
1
Metric and Imperial scale guide
2
Cutting edge guide
3
Trimmer base with calibrated grid
4
Cutting mat
5
Cutting mat removal groove
6
Storage compartment for extra blade cartridges
7
Manual paper clamp (EasyBlade Plus)
8
Blade wear indicator (EasyBlade Plus)
9
Cutting restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal film, film containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry trimmer by holding on to the cutting blade handle.
• Always operate trimmer with both hands and on a stable base or
desk.
• Check the fittings of the rotary blade and safety cutting rail from
time to time.
Service
Do not attempt to service or repair the unit yourself. If your trimmer
is under warranty return it to the point of purchase for replacement
or repair. If your trimmer is no longer under the point of purchase
return period and requires replacement or repair, please contact your
supplier for further assistance.
Guarantee
Operation of this machine is guaranteed for two years from
date of purchase, subject to normal use. Within the guarantee
period, Rexel will at its own discretion either repair or replace the
defective machine free of charge. Defects due to misuse or use for
inappropriate purposes are not covered under the guarantee. Proof
of date of purchase will be required. Repairs or alterations made
Register this product online at www.rexeleurope.com
4
Rexel SmartCut™ EasyBlade
2101975
10
A4, A5 & A6
Centimetres and Inches
320mm
Rexel SmartCut™ EasyBlade Plus
2101977
15
A4, A5 & A6
Centimetres and Inches
320mm
m
NOTE: Please retain this information regarding
safe operation of this paper trimmer
m CAUTION: Trimmer should be operated by an
adult or under adult supervision
m CAUTION: Sharp blade, do not touch the edge of
the blade
Operating the trimmer
Place the material to be trimmed at the selected position using
1
paper guide and hold the material securely in place with left hand
while cutting (A).
Tip: In addition to using the grid pattern and scale for alignment,
use the cutting edge guide to quickly and accurately align your
cuts.
Push down manual clamp (EasyBlade Plus) to ensure paper
2
stays in place (B).
Push down firmly on the rotary blade housing (C1) and slide
3
to opposite end in one motion while keeping the rotary blade
depressed (C2).
When wear indicator (EasyBlade Plus) turns red we recommend
4
you change the blade cartridge (D). Several cutting passes may
be necessary to completely cut through all sheets depending on
the load inserted.
Press and pull out to change the blade cartridge (E, F, G).
5
Cutting mat
Cutting mat has four cutting positions (2 each side). When blade
does not cut cleanly, either rotate the mat or flip over to new cutting
surface. When mat has been used completely on all four positions,
replace it (H, I).
Accessories
Cutting Mat part number: 2101986
EasyBlade Cartridge part number: 2102018
EasyBlade Plus Cartridge part number: 2102019
by persons not authorised by Rexel will invalidate the guarantee. It
is our aim to ensure that our products perform to the specifications
stated. This guarantee does not affect the legal rights which
consumers have under applicable national legislation governing the
sale of goods.
G