Jacuzzi Perfecta Instrucciones De Instalación Y De Funcionamiento página 8

X
Z
Place the tank on the bowl, aligning the mounting
holes of the tank with the mounting holes on the bowl
(Figure 10).
Figure 10 applies to the Espree™ toilet installation
only.
X
[
Thread in two (2) stainless steel mounting screws,
stainless steel flat washers and seal washers bowl
(Figure 11).
X
\
From the underside of the bowl, thread two (2)
stainless steel wing nuts onto the mounting screw
(Front View, below).
Do not overtighten the mounting screws.
Overtightening the mounting screws may damage the
ceramic parts of the toilet.
Pressure must be applied evenly to the tank while
inserting and tightening the mounting screws (Front
View, below). If not, the tank will not not seat correctly
and movement of the tank may occur.
Front View
Wing Nut
X
]
When complete, place a level across the top of the
tank (Figure 12). The tank should be level. If it is not,
make necessary adjustments at this time.
When complete, proceed to the "Leveling the Toilet" section.
Page 8
www.jacuzzi.com
Universal 2-Piece Toilet Series
Tank
Mounting Holes
Mounting Holes
Bowl
Flexible Water
Supply Line
Figure 10
Tank
Mounting Screw
Washer
Rubber Seal
Washer
Mounting Hole
Figure 11
Level
Figure 12
Installation and Operation