Technical Specifications - Metabo BHE-D 24 Instrucciones De Manejo

6950.book Seite 10 Montag, 29. November 2004 12:54 12
ENGLISH
ENG

14 Technical Specifications

Explanatory notes on the information on page 2.
Changes due to technological progress reserved.
P = rated input
1
P = rated output
2
n = no-load speed
1
n = load speed
2
ø max = max. solid drill diameter
s max = max. impact rate
W = single impact strength
m = weight
D = spindle collar diameter
b = drill chuck chucking capacity
Typical A-weighted sound levels:
L = sound pressure level
pA
L = sound power level
WA
During operation, the acoustic level may
exceed 85 dB(A).
Wear hearing protection!
a = typical weighted acceleration in the
hw
hand-arm area
Measured values established according to
EN 50144.
The stated technical specifications are subject to
tolerances (as specified in the respective current
standards).
10