JVC InteriArt Natural Vision T-V LINK AV-32WFT1EP Manual De Instrucciones página 22

                   
To display the FEATURES menu:


1
Press the button to display MENU
(main menu).


2
Press the button to choose FEATURES.


Then press the
             



                
You can set the TV to automatically turn off after a specified
period of time.
Press the  buttons to choose SLEEP
1
TIMER. Then press the
A Sub-menu of the SLEEP TIMER function appears.
Press the
buttons to set the period of
2
time.
You can set the period of time a maximum of 120 min-
utes (2 hours) in 10 minute increments.
To cancel the SLEEP TIMER function:
Press the button to set a period of time to "OFF."


3
Press the button to complete the set-
tings.
The menu disappears.
Note:
• The SLEEP TIMER lamp lights while the SLEEP TIM-
ER function is operating.
• One minute before the SLEEP TIMER function turns
off the TV, "GOOD NIGHT!" appears.
• The SLEEP TIMER function cannot be used to turn
off the TV's main power.
• When the SLEEP TIMER function is on, you can dis-
play the Sub-menu of the SLEEP TIMER function
again to confirm and/or change the remaining peri-
od of time of the SLEEP TIMER function. Press the

button to exit the menu after confirming and / or
changing the remaining time.
button.


button.
$ $ $ $             $ $ $ $     # # # #
You can set the TV to automatically change to a blue screen
and mute the sound if the signal is weak or absent, or when
there is no input from an external device.


1
Press the buttons to choose BLUE
BACK.

2
Press the buttons to choose ON.
To cancel the BLUE BACK function:


Press the buttons to choose OFF.


3
Press the button to complete the set-
ting.
The menu disappears.
    % % % %                         # # # #
When there is a TV channel you wish your children not to
watch, you can use the CHILD LOCK function to lock out the
TV channel. Even when a child chooses a Programme num-
ber (PR) in which a locked TV channel has been registered,
the screen will change to blue and displays
so the TV channel cannot be viewed. Unless you enter a pre-
set ID number by a special operation, the lock cannot be re-
leased and the child cannot view the TV channel programs.
                                                                               


1
Press the buttons to choose CHILD
LOCK. Then press the  button.
"SET ID NO." (ID number setting screen) appears.
2
Set the ID number to your liking.


1
Press the buttons to choose a number.

2
Press the buttons to move the cursor.


3
Press the button.
The Sub-menu of CHILD LOCK appears.


4
Press the buttons to choose a TV
channel.
Every time you press the
number (PR) changes, and the picture of the TV channel
registered in the Programme number (PR) is displayed
on the screen.

(CHILD LOCK)

buttons, the Programme