Maintenance; Warranty - SPARKY BPR 15Li Instrucciones De Uso

according to its designation.
At specific surcumstances under heavy duty the battery
temperature may exceed the allowable value (70ºC). In
this case the electronic thermal protection will automati-
cally switch off the power tool. Take out the battery and
let it cool. You may operate the machine only after the
battery temperature has reached the allowable tempera-
ture range again.
ACCessORIes
Keyless chuck with SDS-plus adapter
SDS-plus to 1/4" inner hex adapter
IX - Maintenance
WARNING: Always set the forward/reverse
switch (6) in central position before any work on the
machine e. g. fitting and removing a battery, tool
change, transport, maintenance and storage.
Regularly check that all the fixing screws are tight. They
may vibrate loose over time.
Re-lubricate all moving parts at regular intervals.
CleANING
For safe operation always keep the machine and its ven-
tilation slots clean.
Regularly check to see if any dust or foreign matter has
entered the grills near the motor and around the switch-
es. Use a soft brush to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used.
WARNING: Never use alcohol, petrol or other
cleaning agent. Never use caustic agents to clean
plastic parts.
WARNING: Water must never come into
contact with the tool.
CHARGeR CleANING INstRUCtIONs
WARNING: Disconnect the charger from the
AC outlet before cleaning.
▪ Dirt and grease may be removed from the exterior of
the charger using a cloth or soft non-metallic brush.
Do not use water or any cleaning solutions.
ImPORtANt! To assure product safety and reliability,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by
Original instructions
certified service centres or other qualified service or-
ganisations, always using genuine replacement parts.
X - Warranty
The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
Faults due to normal wear, overloading or improper han-
dling will be excluded from the guarantee.
Faults due to defective materials implemented as well as
defects in workmanship will be corrected free of charge
through replacement or repair.
The complaints for defective SPARKY power tools will
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
Notes
Carefully read the entire original instructions before us-
ing this product.
The manufacturer reserves the right to make changes
and improvements to the products and to alter specifica-
tions without prior notice.
Specifications may differ from country to country.
9
EN