Volume Adjustment; Basic Operations - NORAUTO PRF-750 Manual De Instrucciones

Parking Brake Inhibit
• When the "BRAKE" cable is connected to
the brake switch, the display on the TFT
monitor will display video only when the
vehicle is applied.
• Parking brake function is overridden when
the video source is set to REVERSE.
• When the parking brake inhibit is active,
the front monitor displays "WARNING Do
not watch wideo while driving!", preventing
the driver from watching content while
driving. Rear video screens are not
affected.
Mute
VOL / MUTE/
Press [
the volume from the unit. Press again to
restore the volume. [
the LCD. Adjusting the volume or using any
of the audio setup features cancels the mute
function.
Power On / Off
Press the [ VOL / MUTE/
unit to turn the unit on. The current mode
status appears in the LCD.
Press and hold the [ VOL / MUTE/
knob to power off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function
selection. The Beep tone can be disabled
through the Setup menu.

Volume Adjustment

To increase or decrease the volume level,
turn the [ VOL / MUTE/
front panel. The volume ranges from "0"to
"39". The LCD or TFT screen displays the
volume level for 3 seconds.
EQ Menu
The Audio Control feature allows you to
easily adjust your audio system to meet the
acoustical characteristics of your vehicle,
which vary depending on the type of vehicle
and its measurements. Proper setting of the
Fader and Balance boosts the effects of the
cabin equalizer.

Basic Operations

] knob to mute
] is displayed on
] knob on the
]
] knob on the
EN-5
Playing Source Selection
Press the [ MENU ] button on the front
panel to change between available playing
sources. The playing mode is displayed on
the screen.
2 1
3 4 3
1. Date and Time display. Double click to
switch to Clock mode.
2. Function icons
3. 1/2 or 2/2: Touch this page button to view
the first or second page of on-screen
buttons. You also can drag left or right on
the blank area to switch the pages.
4. Touch repeatedly to change wall papers.
5. Touch for quick access to Equalizer level
settings.
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface
and the EQ setup interface will display on
the screen.
2. Select EQ mode
∙ [Custom1] ∙ [Custom2]
∙ [Flat] ∙ [Powerful]
∙ [S.Bass] ∙ [Natural]
∙ [Vocal]
3. [ RESET ]: Cancel the equalizer function
settings.
5
3