NEW POL NWC1854NFX Manual De Instrucciones página 37

If there is moisture on the inner parts of your refrigerator:
• Has the food been properly packaged and sealed? Have the containers been well
dried before they were put into the refrigerator?
• Are the doors of the refrigerator opened very frequently? Once the door is opened, the
humidity found in the air in the room enters the refrigerator. Especially if the humidity
levels in the room are very high. The more frequently the door is opened, the faster
will be the humidification.
• It is normal to have water drops formed on the back wall following the automatic
defrosting process (In Static Models).
If the doors are not being properly closed:
• Are food packages preventing the doors from being closed?
• Have the door compartments, shelves and drawers properly placed?
• Are the door seals defective or torn?
• Is your refrigerator standing on level ground?
IMPORTANT NOTES:
• In case of a sudden power loss or disconnecting and reconnecting of the plug to the
electrical socket, the compressor protective thermal element will be opened as the
pressure of the gas in the cooling system of your refrigerator has not yet been
balanced. 4 or 5 minutes later, your refrigerator will start to operate; this is normal.
• If you won't be using your refrigerator for a long time (such as on summer holidays),
please disconnect the plug from the socket. Clean your refrigerator as per Part 4 of
this document and leave the door open to prevent any humidification or odor
formation.
• If the problem persists after you have followed all the instructions above, please
consult to the nearest Authorized Service.
• The appliance you have purchased is designed for home type use and can be used
only at home and for the stated purposes. It is not suitable for commercial or
common use. If the consumer use the appliance in a way that does not comply with
these features, we emphasize that the producer and the dealer shall not be
responsible for any repair and failure within the guarantee period.
Conformity Information
• This appliance is designed for use at an ambient temperature within the 16°C - 43°C
range.
• The appliance is designed in compliance with the EN62552, IEC60335-1 /
IEC60335-2-24, 2004/108/EC standards.
EN - 35 -