Comunello FAST 50/160 Manual De Instrucciones página 21

5. INSTALLATION
Top-hung outward opening window: Overall dimensions and fixing holes
83
68
Filo serramento Filo serramento
10 10
30
Filo serramento
Filo serramento
75
75
5.1 Installation sequence
Check that the force required to open/close it (calculated according to the table under Point 5.2) is less than
or equal to that shown in the TECHNICAL DATA table.
Try manually the window opening, checking for and if necessary eliminating any sticking points that could
cause a malfunction.
Manually test the maximum opening of the window, checking that it is greater than the travel set by the
actuator.
ONLY FOR SOLAR SHADING Check that the width of the upright, where the actuator is to be fitted, is equal to,
or more than, 75 mm. Otherwise, it is NOT POSSIBLE to fit the actuator.
CAUTION: If the apparatus is with bottom-hung windows, there is a danger of potential injury resulting
from the window accidentally falling.
It is OBLIGATORY to fit limiting arms (of the Series 1276 type), or an alternative safety system, of a suitable
size to prevent the window from accidentally falling down.
83
15.5 15.5
68
10 10
30
Solar shading: Overall dimensions and fixing holes
15.5
15.5
L2 L2
L1 L1
L2
L2
L1
L1
35 35
35
35
21