Cleaning And Maintenance - NGS mycarethings Blizar Manual De Instrucciones

Operation
Ensure that the power switch is at the "0" position.
Plug the appliance in and turn on the power switch.
Dry hair after washing with the power switch in position
"2", without connecting the nozzle. Whilst the hair is
still
humid, press the turbo switch to obtain the maximum
flow of air.
For combing, set the power switch in position "2" or
position "1 " and connect the nozzle.
To turn off the appliance, set the power switch at "0"
and unplug.
Cool air shot function.
Low heat temperature.
Middle heat temperature.
High heat temperature.
Cleaning and
Maintenance
Turn off the hairdryer and unplug it from the electricity
network.
Clean the casing with a soft dampened cloth.
Remove and clean the concentrator in tepid soapy
water.
Do not use abrasive cleaning products.
Do not forget to dry all the parts with a soft dry towel.
Manufactured and distributed by:
LURBE GRUP S.A. Spain.
Designed in the EU.
Manufactured in China
www.ngs.eu
-5-
EN
FR
ES
DE
IT
PT
PL