Display - Comelit SPTZ10IR Manual De Instrucciones

4.3 IR
<IR>
<IR>
IR MODE
IR MODE
AUTO
OUTPUT POWER
OUTPUT POWER
TESTING TIME
TESTING TIME
STANDBY POWER
STANDBY POWER
STANDBY TIME
STANDBY TIME
ILLUMINATION ON
ILLUMINATION ON
IR SWITCH ZOOM
IR SWITCH ZOOM
AMBIENT LIGHT
AMBIENT LIGHT
EXIT
EXIT
 IR SWITCH ZOOM: When zoom value reaches to the demanded setting, the IR LEDs will
auto switch from near illumination to far illumination. Zoom value options depend on the
module, 01- 10 ( 12). Default setting is 05.
 AMBIENT LIGHT: This function is system data and can't be changed. It
updates automatically for the ambient light in the range of 50 levels.

4.4 Display

<DISPLAY>
DOME ID
ZOOM
P AND T
ACT
TIME
IR
EXIT
17
 IR MODE: It has auto, small light on, large light on, manual
and off selectable
AUTO
 OUTPUT POWER: 9 levels selectables
9
9
08S
08S
 TESTING TIME: 2-15s selectable
06
8
15S
 STANDBY POWER: IR power standby can be set to 1-
20S
08L
08L
9 level when the dome camera is in idle time, which can
05
05
improve the life of IR lamps..
 STANDBY TIME: The time interval from the no any
operation to dome camera to the effective operation to it.
 ILLUMINATION ON: Its range is 0-25 level. In the IR
mode of auto, when the "ILLUMINATION ON" is lower
than "AMBIENT LIGHT", the picture turns to color and
IR lamps turn off. When "ILLUMINATION ON" is higher
than "AMBIENT LIGHT", likewise, the picture turns to night
and IR lamps turn on
 DOME ID : Displays the camera's address.

ZOOM: Displays the zoom level.

P AND T: Displays the Pan and Tilt degrees.
ON

ACT: Displays the current action, such as set preset, call
ON
ON
preset, ON or OFF etc.
ON

TIME: Displays the current time on screen.
OFF
ON
 IR: " ☀ " indicates that the IR LEDs are lit. The status can
be seen at the top left corner of the screen. The IR display
progress bar "
illumination level.
" will be filled gradually along with the