Dome; Preset; Scan - Comelit MPTZ37IR Manual Del Usuario

<PASSWORD>
SET PASSWORD1
SET PASSWORD2
PASSWORD ENABLE OFF
SAVE
EXIT

4.2 Dome

4.2.1 Preset

<PRESET>
PRESET NO
CALL PRESET
<SET PRESET>
EXIT
<PRESET>
PRESET NO
CALL PRESET
<SET PRESET>
PRESET 1: SAVE
PRESET 2: BACK

4.2.2 Scan

<SCAN>
SCAN SPEED
<SET A POS>
<SET B POS>
A/B SCAN
360 SCAN
EXIT
21
<PASSWORD>
 SET PASSWORD 1: Enter the password.
888888
 SET PASSWORD 2: Re-enter the password.
888888
 PRESET NO: Select the preset number to be SET or
CALLED.
001
 CALL PRESET: Calls the preset number selected above.
 <SET PRESET>: Writes the current camera position into the
preset location entered above. To write the preset, enter the
command on your PTZ controller for "Call preset 1". To cancel
the write operation, enter the command on your PTZ controller
for "Call preset 2".
001
Because some presets are used to operate special functions,
they can't be set and called normally.
 SCAN SPEED: Scan speed includes setting the speed of
A-B scan and 360°scan.
 SET A&B POS : The effective scan range of the A&B
9
point boundaries is 20-340°.
 A/B SCAN: The dome scans back and forth between
two preset points(A and B point)
 360 SCAN: The dome scans circle by circle
horizontally.