Using The Wireless Microphone - Party Light & Sound PARTY-SP500 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
Controls on the rear panel
1. LED screen
2. Mp3 control
MODE: USB/TF/BT/FM convertor
: Play/Pause/Scan
Press to start playing music file
Press one more to pause current
track. Press again to return to
normal mode.
: Press to skip previous
song/channel/VOL-
: Press to skip next
song/channel/VOL+
REC: recorder control
Record button: In USB/TF mode,
press to record received signal
from built-in MIC to USB/TF. Press
again to stop recording and play
the recorded files. Hold play key to
switch recording folder or other
music folder
IR: remote control
Bluetooth pairing name: PARTY-
SPEAKER
3. Master Volume control
4. USB input
5. TF card input
6. 5 band equalizer control
7. Recorder
8. 3.5mm line input
9. ECHO control
10. MIC input level control
11. MIC line input
12. Charge battery indicator
13. LED switch
14. Main power switch
15. Fused IEC mains inlet
16. Wireless microphone channel receiving antenna
CONNECTION OF A WIRED MICROPHONE (not included)
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound
output.

USING THE WIRELESS MICROPHONE

Open the battery compartment and insert two AA batteries with the correct polarity.
Turn the switch on the mic to ON. If the power indicator lamp doesn't flash or doesn't light up, check if the
battery has been properly inserted.
©Copyright LOTRONIC 2016
PARTY-SP500/SP700
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Party-sp700

Tabla de contenido