Innovaciones M.S. GAMA COMPLET COLECHO Manual De Instrucciones página 22

Maintenance of textile parts:
They can be cleaned with a sponge moistened in warm soapy water.
TISSUE COMPOSITION:
Plain fabric: 100% polyester.
Mesh fabric: 100% polyester.
Padded bed base: 120x60x2 cms.
1. OPENING OF THE CRADLE AND LOCK OF THE UPPER FRAME:
- Remove the cradle from the carrying bag and remove the padded bed base
that surrounds it.
- Separate each of the corners. The bottom of the crib should never be used at
ground level, but should always be kept slightly elevated.
- Lift the upper frame until it is horizontal. Snap the crossbars until you hear
the safety click.
- Check that the frame tubes are firmly attached trying to lower or fold them.
2. BLOCK OF THE LOWER STRUCTURE:
- To lock the lower structure, press the center part of the cradle.
- Check that the frame tubes are firmly attached trying to lower or fold them.
NOTE: for a correct installation of the cradle, the upper part of the structure
must be locked before the lower part.
3. INSTALLATION OF THE PADDED SOMIER (120 x 60 x 2 cms):
- Unfold the mattress and place it at the bottom of the crib, with the printed
polyester or cotton side facing up.
- The adhesive tapes of the padded bed base must be inserted through the
openings in the bottom fabric and then fixed to the bottom so that the bed
base is immobilized.
4.5.6. HEIGHT REGULATOR INSTALLATION:
- The height regulator must be fixed to the cradle, with the help of two sliding
closures (zippers), as it consists of two L-shaped sliding closures (zippers) that
meet at the corner.
22