Publicidad
CAUTION: If longer bolts (minimum grade 5) are substituted to mount winch or to
mount a roller guide at the side mount pads, bolt length must be such as to allow a
minimum of 12,7mm (.50 in) thread length engagement in the tapped holes in side of
each end bearing. Use of excessive length bolts will damage the winch and prevent
freespool of the drum. Torque bolts to 75 Nm (55 ft-lb).
.
MOTOR END
FOOT MOUNT
MID MOUNT
INSERT ROPE AS SHOWN FOR "A" ROTATION
OVERWOUND APPLICATION.
"A" ROTATION
DIRECTION
TO REEL IN
ROPE DRUM
TIEPLATE AT SIDE LOCATION
TIEPLATE AT FOOT (BASE) LOCATION
INSERT ROPE AS SHOWN FOR "B" ROTATION
(UNDERWOUND APPLICATION)
"B" ROTATION
DIRECTION
TO REEL IN
20
17
19
GEAR HOUSING END
20
17
19
Publicidad
