Initial Use; Device Functions; Setting The Time/Date; Alarm" Function - Beurer WL 75 Instrucciones De Uso

Display
1 2
3
15
14
13
12
1 Volume
2 Year (Y)/Month (M)/
Day (D)
3 Radio alarm mode
4 Time/Date/Radio
frequency
5 SET mode
6 AUX mode
7 Alarm mode
8 Radio

6. Initial use

1. Remove the packaging material.
2. Check that all parts listed are present.
3. Check the device, mains adapter and AUX cable for
damage.
4. Download the free "beurer LightUp" app from the Apple
App Store (iOS) or Google Play (Android).
5. Activate Bluetooth
6. Place the device on a firm, even surface. The device
must be placed near an easily accessible socket.
7. Insert the mains adapter connector into the mains
adapter socket on the rear of the device.
8. Insert the mains adapter into a suitable socket.
9. The time 0:00 is shown on the device display.
10. Place the cable antenna at the back.
11. Open the "beurer LightUp" app and follow the instruc-
tions.
12. Once the WL 75 is connected, the time on the wake
up light is updated.

7. Device functions

You can either set the device functions using the "beurer
LightUp" app or the buttons on the wake up light.
We recommend setting the device functions using
the "beurer LightUp" app as it is more convenient.
5
4
9 Bluetooth
®
10 Time
11 Display
12 Alarm memory space 1, 2
13 "Sleep" function
14 Beep
15 Wake-up melody
on your smartphone.
®
If the wake up light is connected to a smartphone,
all the buttons on the wake up light are locked. Once
6
the smartphone and wake up light are disconnected,
you can use the buttons on the wake up light again.
7
8
9

7.1 Setting the time/date

10
Note
11
You can set the time and date using the "beurer LightUp"
app or the buttons on the wake up light. If you connect
the wake up light to your smartphone using the "beurer
LightUp" app, the time and date are automatically set
on the wake up light.
To set the time using the buttons on the wake up light,
proceed as follows:
1. Press the Set button on the device three times. "SET
Time" appears on the display. Wait three seconds until
the hour format "
2. Set the hour format using the
24 hr
format "
firm with the Set button.
3. The hour flashes on the display. Set the hour using the
/ buttons. Confirm with the Set button.
4. The minute flashes on the display. Set the minute using
the / buttons. Confirm with the Set button.
5. The year
(Y)
the / buttons. Confirm with the Set button.
6. The month
using the
7. The day
(D)
/ buttons. Confirm with the Set button.
7.2

Alarm" function

"
Setting the alarm
Note
If you set the alarm using the buttons on the wake up
light, you can select the alarm time and the alarm tone.
If you set the alarm using the "beurer LightUp" app, you
can also select the alarm days, snooze time and a simu-
lated sunrise (wake up light gradually becomes brighter
over a set period of time).
To set the alarm using the buttons on the wake up light,
proceed as follows:
1. Press the Set button on the device once. "SET Alarm"
appears on the display. Wait three seconds until
flashes on the display.
2. Use the / buttons to select either alarm
. Confirm with the Set button.
13
24 hr" flashes on the display.
/
" or 12-hour format
AM/PM
flashes on the display. Set the year using
flashes on the display. Set the month
(M)
/ buttons. Confirm with the Set button.
flashes on the display. Set the day using the
buttons (24-hour
12 hr
" "). Con-
or alarm