Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FAN NETWORK:
It is possible to connect up to 32 fans with another to design a fan network which can be adjusted and controlled
with only one remote control.
To create a fan network, assign fan by fan, a channel number to each fan without connecting one to each
other.
Take care not to assign the same channel number to different fans
First step:
Check that the on/off isolator switch is in position "0"
-
Open the front cover of the control box and place the dip switch SW2-1 on position "ON"
-
-
Connect the cable of the remote control PROSYS CTBH to the outlet J9
-
Press the two keys
-
The following display appears:
CHANNEL NUMBER
OK
x
Press the key
(OK).
If the selected channel number does not match the number of the fan, the LED « ERROR » lights up and the
following message appears.
Communication
Error
C : X
Press the key
to access at the display.
CANAL NUMERO
OK
X
To modify the channel press the key
and
of the remote control during 5 seconds
or
and confirm by pressing the key
.
Publicidad
Tabla de contenido
