Cleaning; Transport; Storage - Nemaxx EB52 Instrucciones De Uso

KEN002EB52

Cleaning

Clean the machine and its accessories thouroughly after each application so that the
faultless function is kept.
• Clean all movable parts on a regular basis.
• Clean the case with a soft brush or a dry cloth.
• Do not clean the machine under running water or using a high-pressure cleaner.
• Do not use solvents (gasoline, alcohol, etc.) for plastic parts, otherwise such parts may
be damaged.
• Keep the handles free of oil and grease.
Water, solvents and polishing agents shall not be applied.
• Make sure that the ventilation slots (i) for the engine cooling are free (risk of overheating).
• Keep also the cooling fins for the cylinder (j) free from dust and dirt.

TRANSPORT

Before each transport
• Switch off device.
• Wait until the cutting device does not longer move.
• Carry the product with the handle.
• When transporting the product within a car put it in the boot or on a separate loading
area. Secure the machine against tipping over, damages and fuel spillage.

STORAGE

• Keep unused machines in a dry and closed area out of the reach of children.
Do not store them close to a cooker, oven or hot-water apparatus with permanent flame
or other spark- generating devices.
• Allow the engine to cool down before storing the machine.
• Before extended storage, please observe the following to increase the service life of the
device and to ensure smooth operation:
– Thoroughly clean the device.
– Oil all moving parts with environmentally compatible oil.
– Do not use grease.
– Empty the fuel tank completely.
– Dispose of remaining fuel in an environmentally compatible manner.
– Operate the engine until the carburetor is empty.
– Check the machine for perfect condition to ensure a safe use of it after a longer period
of storage.
EN
20
v04 • 22.05.2017