DeWalt DW733 Manual De Instrucciones página 27

Fig. B
15
6
Table Extensions (Fig. C1, C2)
1. Fold down the table extensions
2. Both tables must be level with the main table.
3. To check, turn the depth adjustment handle
way up.
a. Place a level over the table extensions and the
16
main table .
17
b. Press the edge of the table extensions down to
remove any play.
If adjustment is required, proceed as follows: slacken the
nuts 18 and adjust the bolts
(Fig. C2).
Fig. C1
3
16
Fig. C2
19
18
Depth Adjustment (Fig. A, D1–D4)
Your DW733 is equipped with a high precision depth
adjustment system including a depth adjustment scale
(Fig. D3), a material removal scale
and a depth stop (Fig. A).
14
1. Unlock the head lock lever
2. Pull the depth adjustment
One turn corresponds to a change in cutting depth of
approx. 1.5 mm.
- Turn clockwise to decrease the cutting depth.
- Turn counterclockwise to increase the cutting depth
(Fig. D2).
3. Read the finished thickness of your workpiece on the
depth adjustment scale
8
5 and 10 (Fig. C1).
3 all the
19 until the tables are level
17
5
16
8
9 (Fig. D4), a fine adjuster
(Fig. D3) by pulling it up.
2
handle up (Fig. D1).
3
(Fig. D3).
4. Make sure the material is under the material removal
gauge 20 . Read the amount of wood being removed
on the material removal scale
5. Lock the head lock lever
Fig. D1
Fig. D2
22
21
Fig. D3
2 33
Fig. D4
9
20
Fine Adjustment (Fig. D2)
Fine adjustments are ideal for shaving small amounts from
planed material. For example, if your planed workpiece is
77.5 mm and should be 76.0 mm, proceed as follows:
1. Turn the circular label
21
the arrow 22 . Do not make any other adjustments.
2. Turn the depth adjustment handle
the 1.5 mm mark aligns with the arrow.
ENglIsh
9 (Fig. D4).
2 (Fig. D3).
3
3
34 8
until the 0 mark aligns with
3 clockwise until
25