NOTE
This blood pressure monitor complies with the EC Directive and bears
the CE mark This blood pressure monitor also complies with mainly
following standards (included but not limited):
Safety standard:
EN 60601-1 Medical electrical equipment part 1: General requirements for safety
EMC standard:
EN 60601-1-2 Medical electrical equipment part 1-2: General requirements for
safety- Collateral standard: Electromagnetic compatibility- Requirements and tests
Performance standards:
EN 1060-1 Non-invasive sphygmomanometers - General requirements
EN 1060-3 Non-invasive sphygmomanometers - Supplementary requirements
for electromechanical blood pressure measuring systems.
EN 1060-4 Non-invasive sphygmomanometers - Test procedures to determine
the overall system accuracy of automated non-invasive sphygmomanometers.
z
Follow instructions for use.
BF Classification:
- Internally powered equipment
- BF type applied part
- IPX0
- Not suitable for use in presence of flammable anesthetic mixture with air
or with Oxygen or nitrous oxide
- Continuous operation with short-time loading
To avoid inaccurate results caused by electromagnetic interference between
electrical and electronic equipments, do not use the device near a mobile phone
or microwave oven. At least keep a maximum output power of 2 W yields
and a distance 3.3m away from this equipment.
Discard the used product to the recycling collection point according
to local regulations.
Gima S.p.A
ENGLISH
38
0476