Storage - Kamikaze KV 300 Manual De Uso

Tijera eléctrica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRICAL PRUNING SHEAR
5. Release the trigger when you hear the motor turning.
6. The electric motor rotates during calibration. When the motor stops
turning the calibration is complete.
16. PRUNER STORAGE
The most important thing to keep in mind before storing your pruner's lithium
ion batteries, is to make sure that the batteries are fully charged up and the
power switch off. Storing your battery pack for long extended periods of time
with little or no charge will damage your battery and void your warranty.
Ensure that the battery is fully charge.
Make sure that the battery pack is switched off.
Avoid storing the device in extremely hot or cold environments.
If the device will not be used for a long time, disconnect the battery
before storing it.
Batteries and chargers must be placed in a secure location prevent heat,
dust and moisture from entering and check that the switch is off.
Batteries should be stored in a dry environment.
Recommended storage temperatures:
Storage less than 1 month
Storage less than 6 month
Storage over 6 months
The battery and flammable matter must be kept at least 5-feet apart.
In order to ensure the service life of the equipment and to prevent its
degradation, it must be stored with enough battery power.
When not in use, charge the battery at least once every 6 months.
Do not turn on the power switch while storing.
-20°C
~
+60°C
-10°C
~
+35°C
0°C
~
+30°C
75
www.kamikazevolpi.com

Publicidad

Tabla de contenido
loading

Tabla de contenido