Playing An Audio Cd; Basic Functions; Repeat; Programming A Playlist - Oglo MB-O-700-D Instrucciones De Uso

playing an audio CD

Your micro-stereo can play audio CDs as well as MP3s recorded on CD-R or CD-RW.
Turn on the player using the button on the appliance or the remote control. Select the DISC
1.
source by repeatedly pressing the
the remote control.
Press to open the disc compartment, then insert a disc (label side up).
2.
Close the compartment. The appliance loads the disc, and displays information about the
3.
CD contents, such as the total time and number of tracks, on the screen. Playback then starts
automatically.
For CDs containing audio fi les in MP3 format, the micro-stereo starts playback with the fi rst track of
4.
the fi rst album in alphabetical order. To go directly to another track, press briefl y on the
buttons.

Basic functions

Starts, pauses or resumes playback.
Stops playback.
Accesses the previous track.
Press and hold to play backwards at an accelerated speed.
Accesses the next track.
Press and hold to play forwards at an accelerated speed.
INTRO Plays the fi rst 10 seconds of each track.
SHUFFLE Random disc playback.
ALBUM- /
In MP3 playback, allows access to the next or previous folder.
ALBUM+

Repeat

When playing an audio CD, you can select a repeat option. Press the REPEAT button to repeat a
•
track, a second time to repeat the entire disc, and a third time to disable repeat. The repeat symbol is
displayed on the top right of the screen.
When playing MP3 audio fi les, press the REPEAT button to repeat a track, a second time to repeat an
•
album, a third time to repeat the entire disc, and a fourth time to turn repeat off.
38
button on the micro-stereo or by pressing the CD button on
BASS

Programming a playlist

When the micro-stereo is stopped, press the PROG button, then select the desired track number
•
using the and
Repeat as often as necessary (20 tracks maximum). Then press
•
is in the order you have defi ned. Use the
programming.
Press the button twice to cancel the programming.
•
and

listen to FM radio

Connect the antenna cable supplied to the back of the micro-stereo, and extend it fully.
1.
Turn on the micro-stereo, and select the FM source by repeatedly pressing the
2.
micro-stereo or the remote control.

Performing a full scan on the FM band

TREBLE
When the appliance is turned on, briefl y press the SCAN button on the remote control or the
1.
button on the micro-stereo to perform a full scan on the FM band. The fi rst thirty stations found are
BASS
stored.

Search for a radio station automatically

Press and hold the
1.
FM scanning stops when a radio station has been found.
2.
You can then briefl y press the
3.
as described in the next paragraph.

Search for a radio station manually

Briefl y press the
1.
frequency is reached.
Each time the or
2.
If reception is poor, adjust the FM antenna position or change the frequency.
3.
buttons. Then press PROG again and select another track number.
to start playback. Playback
and buttons to navigate through your
and buttons for 2 seconds to perform an automatic scan.
or buttons on the remote control to refi ne your search,
or buttons on the remote control until the optimal reception
keys are pressed, the frequency decreases/increases by 0.05 MHz.
button on the
TREBLE
BASS
39