Establishing A Bluetooth* Connection; Using The Remote Control In Bluetooth; Mode; Incoming Call Detection - Oglo MB-O-700-D Instrucciones De Uso

establishing a Bluetooth* connection

If you have a Bluetooth audio device (smartphone, tablet, laptop, etc.), you can pair it to the micro-
*
stereo. The Bluetooth connection enables you to play back music recorded on your audio device
*
without using a cable.
Turn on the micro-stereo, and select the BT source by pressing the
several times or directly on the BT button on the remote control.
BT fl ashes on the display, indicating that the pairing mode is active.
1.
Then please refer to the user manual of your Bluetooth
2.
stereo. This is called Oglo MB-O-700-D in the list of detected Bluetooth
#
Pairing is successful when the BT indication becomes fi xed on the display.
3.
Start playback on your audio device.
4.
To stop playback, press the button on the micro-stereo, remote control or your smartphone. Or
5.
change the playback source on the micro-stereo or remote control.
This micro-stereo can be paired to all devices equipped with Bluetooth
•
After pairing has been completed, the last stored Bluetooth
•
as soon as the Bluetooth* source is selected.
The device can only be paired to one Bluetooth* device at a time. To pair another device, cancel the
•
pairing of your Bluetooth* device and then repeat the previous steps 1 to 4 with the new device.
44
button on the micro-stereo
audio device for pairing with the micro-
*
devices.
*
* wireless technology.
audio device will automatically reconnect
*
BASS

Using the remote control in Bluetooth

Press this button to start playback.
•
Press a second time to pause playback.
•
Press again to resume playback.
•
Accesses the previous track.
Accesses the next track.

Incoming call detection

When a call is received or dialled, the smartphone pauses music playback. The transmission of music
•
from your phone to the micro-stereo is interrupted.
When the call ends, the phone resumes playback from the point where it was interrupted, and plays
•
the music back through the micro-stereo speakers.

Cancel the active Bluetooth* connection

If you want to cancel the pairing between the micro-stereo and your smartphone, to pair it with another
smartphone, press and hold the BT button on the remote control for 5 seconds. BT fl ashes again on
the display.

connecting a USB removable media

Turn on the micro-stereo. Select the USB source by repeatedly pressing the
1.
micro-stereo or the remote control.
Playback starts automatically. To go directly to another track, use the
2.
The USB port also enables you to recharge your USB devices when the micro-stereo is
switched on, delivering a voltage of 5 V
TREBLE

mode

*
button on the
or buttons.
500 mA, whatever the source selected.
BASS
45