Program Playback - OK. ORC 530-B Manual De Instrucciones

EN
CD/USB PLAYBACK
1. Start or pause playback: Press PLAY/PAUSE. In pause mode, track number will flash on the
17
display.
2. Stop playback: Press STOP. In stop mode, total number of tracks will appear on the display.
Skip to next track: Press SKIP+ . Press and hold to fast forward.
3.
4. Skip to previous track: Press SKIP- . Press and hold to fast reverse.
During playback, press MODE repeatedly to switch the playback modes as follows:
5.
Press
1x
2x
3x
4x
5x
Notes:
• This product reads CD, CD-R/-RW. Other discs are not supported.
• When playing CD-R/RW discs the playback quality might be influenced by the quality of the burned
disc. When burning CD-R/RW disks with audio files we recommend using the slowest burning speed.

PROGRAM PLAYBACK

Notes:
• Up to 20 CD or up to 99 MP3 tracks can be programmed for a playback in any desired order.
• Programmed playback can only be made from one single source - it cannot include tracks from CD
disc and USB storage at the same time.
Stop playback: Press STOP.
1.
18
2. Enter program settings: Press MODE. PROG and P01 will show on the display.
Select desired track: Press SKIP+ or SKIP- .
3.
4. Store selected track into the program memory: Press MODE again. P02 will now show on the
display.
5. Repeat step 3 and 4 to program additional tracks.
After programming all the desired tracks, press PLAY/PAUSE to start program playback.
6.
PROG appears on the display.
Stop playback: Press 1x STOP.
7.
8. Cancel program playback: Press 2x STOP. PROG disappears from the display.
IM_ORC530B_171023_V07_HR.indb 14
Display Result
REP Repeat one track. REP will flash on the display.
REP ALBUM Repeat album (only for MP3).
REP ALL Repeat all tracks.
RAND Random playback.
- Normal playback.
14
23/10/17 12:05 pm