Overhead Rigging - JB Systems Light µ-QUASAR LASER Manual De Instrucciones

ENGLISH
8. ON/OFF KEY ACTIVATED SWITCH: used to switch the unit on/off. Use the keys to
make sure only a skilled operator is able to switch the laser on.
9. LASER APERTURE: the laser beam exits the enclosure here; make sure to NEVER
look inside the unit through this opening while the laser effect is switched on!
LASER WARNING LABELS: warn against a potentially dangerous laser when not used
by skilled operators.
 "Laser Radiation. Avoid exposure to beam. Class 3R laser product"
 "Caution – Class 3B laser. Laser Radiation when open. Avoid exposure to beam."

OVERHEAD RIGGING

Important: The installation must be carried out by qualified service personal only.

Improper installation can result in serious injuries and/or damage to property.
Overhead rigging requires extensive experience! Working load limits should be
respected, certified installation materials should be used, the installed device
should be inspected regularly for safety.
Make sure the area below the installation place is free from unwanted persons during

rigging, de-rigging and servicing.
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or

liquids. The fixture must be fixed at least 50cm from surrounding walls.
The device should be installed out of reach of people and outside areas where persons

may walk by or be seated.
Before rigging make sure that the installation area can hold a minimum point load of

10times the device's weight.
Always use a certified safety cable that can hold 12 times the weight of the device when

installing the unit. This secondary safety attachment should be installed in a way that no
part of the installation can drop more than 20cm if the main attachment fails.
The device should be well fixed; a free-swinging mounting is dangerous and may not be

considered!
 Don't cover any ventilation openings as this may result in overheating.
The operator has to make sure that the safety-relating and machine-technical

installations are approved by an expert before using them for the first time. The
installations should be inspected every year by a skilled person to be sure that safety is
still optimal.
CAUTION EYE DAMAGE: Always position the laser in a way that
prevents the audience from looking directly into the laser beams. The
installation should assure that the beam will not strike the audience.
JB SYSTEMS
®
USER MANUAL
5/35 µ-STAR & µ-QUASAR LASER
ENGLISH
HOW TO CONTROL THE UNIT
# Button function
AUTO
1
MUSIC
2
ON/OFF
3
COLOR
4
CHANGING
PAUSE
5
A
Red Strobing
B
6
MANUAL
&
Green Strobing
CONTROL
7
C
Effect Speed
JB SYSTEMS
®
USER MANUAL
Description
Automatic shows (LED is red)
Sound activated shows (LED is blue)
The LED is flashing when the sound is
detected.
After you have pressed the green music
button, you can select a number from 1
(low) to 9 (high) to set the sensitivity of the
microphone.
Used to switch the fixture ON or OFF
To change the laser color
red / green / red + green
Effect pauze
1 ~ 8 = STROBO from Fast to Slow
9 = ON 0 = OFF
1 ~ 8 = STROBO from Fast to Slow
9 = ON 0 = OFF
1 ~ 8 = SPEED from Fast to Slow
0 = OFF
= Effect Rotation DIRECTION
6/35 µ-STAR & µ-QUASAR LASER