Troubleshooting; Statement Of Compliance - Rimax Baby RB203 Manual De Usuario

User Manual

5. Troubleshooting

If you are not getting any signal at all:
* Make sure the camera and the monitor are turned on.
* Make sure the power plugs are pushed all the way in.
* Check that the channel on the camera and the monitor are set to the same
number.
If you have seen the opening screen, but nothing appears afterwards.
* Please check if your Camera unit is turned on. The green Power LED will
light up and indicate the system is on.
* Make sure the Camera unit and Monitor Unit are within the appropriate
range of each other. For trouble shooting purpose, you should remove all
the obstacles between the two devices. Try a shorter distance.
* Please remove the battery and unplug the A/C adapter. Wait for 10
minutes.
* Plug the A/C adapter back to the Monitor Unit and retry to power on the
Monitor Unit.
If all above steps fail, you are advised to pair the Monitor Unit and Camera
Unit.
* Please following the steps mentioned in Pairing/New Added Camera Unit.
* If you would like to return to the default settings, press and hold
meanwhile push on/off , and then press

6. Statement of Compliance

Flamagas S.A. hereby certifi es that the model Rimax
Baby Kangoo RB203 complies with the basic requisites
and other requirements of Directive 1999/5/EC.
A full copy of the statement of compliance can be found
at:
www.electronicafl amagas.com
Baby Kangoo RB203
EN
. The setting will be restored.
25
,