Tabla de contenido
Publicidad
Symptom
Recording
Cannot record.
"
" is displayed during
recording.
Sound skipping occurs in the
recording file.
Recorded audio includes a
rustling noise.
Recorded sound is distorted.
There is a noise at the
beginning of the audio.
Noise is incorporated in the
recorded audio, making it
difficult to hear.
Recorded sound is too loud or
too quiet.
• Is there free space in internal memory?
• Does the folder contain the maximum number of files that can be
recorded (199)?
If there are 199 files recorded, no more files can be recorded.
• Writing to internal memory may have become slow. Back up the files to a
computer and then format the unit.
• Was the unit formatted using a computer? If the internal memory is
formatted using a computer, the optimum performance of the unit may not
be achieved. Format it with the unit. ( ➜ page 11)
• If you rub the unit with a hand or an object touches the unit during
recording, a rustling sound will be recorded through the microphone.
Try your hardest to avoid contact with an object during recording with a
microphone.
• Lower the microphone sensitivity ( ➜ page 12) or move further away from
the recording sound source.
• If you are using the unit and a mobile phone close to each other, keep
them away from each other.
• Set the optimal recording settings by changing the sound quality and
microphone sensitivity ( ➜ page 12) and performing trial recordings.
• Change the microphone sensitivity. ( ➜ page 12)
Checkpoints
ENGLISH
29
29
Publicidad
Tabla de contenido
