Technical Specifications; Noise And Vibration Information - SPARKY HeavyDuty FK 3012 Instrucciones De Uso

Technical specifications

Model
Power input
Rated speed
Spindle thread
Spindle thread length
Wheel arbour
Wheel diameter, max.
Dust extraction port diameter
Groove depth
Groove width
Overall dimensions
Length
Width
Height
Weight (EPTA Procedure 01/2014)
Protection class (EN 60745-1)

NOISE AND VIBRATION INFORMATION

Measured values determined according to EN 60745.
Noise emission
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Cutting grooves in concrete
Vibration emission value a
Uncertainty К
* The vibration emission values are determined according to 6.2.7 EN 60745.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce
the harmful effect of vibrations.
Dust from material such as paint containing lead, some wood species, minerals and metal may
be harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in con-
junction with additives for wood conditioning (chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
▪ Where the use of a dust extraction device is possible it shall be used.
▪ To achieve a high level of dust collection, use vacuum cleaner for wood or for wood and/or miner-
als together with this tool.
▪ The work place must be well ventilated.
▪ The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
Original instructions
pA
wA
h
FK 3012 / FK 3014
1200 W / 1400 W
10500 min
-1
M14
20 mm
Ø22.23 mm
Ø125 mm
Ø35 mm
0÷30 mm
3÷29 mm
390 mm
155 mm
196 mm
3.5 kg
II
94 dB(A)
3 dB
105 dB(A)
3 dB
6.0 m/s
2
1.5 m/s
2
3
EN