Using The Device - Ciatronic SM 3282 Instrucciones De Servicio

WARNING:
• Children shall not play with the appliance.
• Appliances can be used by persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of
the appliance in a safe way and if they understand the hazards
involved.
CAUTION:
• Do not use this appliance to chop up any hard food such as ice
cubes, nutmeg, or large pieces of cooking chocolate. This can
destroy the blade!
• This appliance is not designed to be immersed in water during
cleaning. Please follow the instructions that we have included for
you in the chapter on "Cleaning".
Instructions
• The appliance is designed for the mashing and mixing of
food and drinks.
• Chop up large pieces of solid food before mashing (max. Ø
1.5 cm) and add a little liquid.
• The appliance is designed to process only small quantities
of food! Fill the container with the maximum quantities
specified in the table!
• liquid food up to max. 300 ml
• solid food up to max. 500 g
• Adapt the capacity to the foaming behavior of the food to
be mixed. Decrease the amount if necessary.
• Pay attention to the slowing down of the motor after
shutting off.
• Short-time operating: Do not operate the appliance with
food for longer than 1 minute. Leave the device to cool
down for at least 10 minutes before using again.
Preparation
1. Take out all the parts carefully out of the packing.
2. Clean the device before using it for the first time as
described in "Cleaning".
26
Assembly
Assemble the motor housing and the hand blender as follows:
1. Position the hand blender with the white arrow next to the
symbol on the motor housing.
2. Turn the hand blender in the direction of the closed lock
until it locks in place. and
with one another.
Dismantling
• In order to separate the hand blender from the motor
housing, turn it in the direction.

Using the Device

1. Fill the food to be mixed into the mixing bowl (max. 500 g /
300 ml). Immerse the hand blender in the mixing bowl.
2. Electrical connection
• Check whether the electrical voltage that you intend to
use is the same as that of the machine. Details are to
be found on the label on the base.
• Only connect the machine to a properly installed safety
socket.
3. Please hold the device in such a way that you can operate
pushbutton I or pushbutton II with your fingers.
4. Press one of the buttons.
must be completely in line