Bluetooth Operation; Sleep Function; Technical Specifications - Trevi HCX 10D8 DAB Manual De Usuario

ENGLISH
ID3 FUNCTION
NOTE: function valid only for MP3 tracks
1. During playback of an MP3 CD, press the DISPLAY button (10) to activate the ID3 function, information regarding the track
being played will be shown.
USB INPUT OPERATION
REPRODUCTION
1. Connect a USB memory device to the USB (10) input.
2. Switch on the appliance and press the SOURCE button (6) several times until the USB READ indication appears on the display,
indicating that the data on the USB device is loading. In the absence of the USB device, the display will show NO USB.
Note:
- The device may not support some USB devices, this is due to the incompatibility of some processors.
3. For the rest of the functions, refer to the paragraph "CD-MP3 PLAYER OPERATION".
INPUT AUX IN
1. Switch on the appliance and press the SOURCE button (6) several times until the AUDIO IN indication appears on the display.
2. Connect any unit with audio output through the appropriate cable to the AUX IN (8) input.
3. Command the external unit from its commands.
4. Adjust the volume by controlling the unit (4) or by using the VOL + or VOL- (11) keys on the remote control.

BLUETOOTH OPERATION

1. Switch on the appliance and press the SOURCE button (6) several times until the BT indication appears on the display.
2. The word "PAIRING" will start to flash on the display and the system will automatically enter search.
3. Activate the Bluetooth functionality on the external device to be paired and make it visible.
4. Start the device search. At the end, look for the "HCX 10D8 DAB" device.
5. Enter the password "0000" if necessary.
6. After pairing, the device will emit a notification sound and the word "BT AUDIO" will remain on the display.
7. Start audio playback from your device.
8. Press the :/TUN+ or 9/TUN- to move to the previous or next track.
9. Press the  to activate the pause. Press the key again to deactivate the pause.
10. Hold down the  key for a few seconds to remove the coupling.

SLEEP FUNCTION

The SLEEP function allows you to program the automatic switch-off after a certain time of the device.
By pressing the SLEEP key several times you can select the switch-off time (90, 80, 70, 60, 50, 40, 30, 20, 10, 00 = off).
The symbol ZZZ appears on the display to indicate the active function. After the programmed time has elapsed, the device switches
to standby mode automatically.
HEADPHONES
1. Insert the headphones into the headphone jack (7).
2. Start the desired playback and adjust the volume.

TECHNICAL SPECIFICATIONS

Power and consumption:
FM band reception:
DAB / DAB + band reception:
Bluetooth transmission power: ....................................................2.5mW
Bluetooth transmission frequency: .................................................2.4GHz
Unit dimensions:
Speaker dimensions:
14
............. 100-240V 50 / 60Hz - 22W
.......................................87.5 - 108 MHz
..........................174.928 - 239.200 MHz
...............................140 x 210 x 170 mm
...............................130 x 125 x 170 mm
HCX 10D8 DAB