Device Setup - Velleman VRC1601D Manual Del Usuario

3. The Batteries
The LCD will indicate whenever the batteries need replacement. Replace all used batteries at a time with fresh ones.
1. Open the battery compartment.
2. Insert 4 x 1.5V AAA batteries (the use of alkaline batteries is recommended) respecting the polarity.
3. Close the battery compartment.
Battery Battery Battery
full half full low
4. Device Edit
a. Adding a Device
Add a new device when you would like to operate a second television set, VCR, DVB, CD player etc.
• Hold the SET key pressed for 3 seconds.
• Select DEVICE using the
or the button and press
OK.
• Select ADD NEW using the
or the button and
press OK.
• The LCD will display SELECTDEV. Press the device key
corresponding to the device you would like to add. You
can add up to 8 devices.
• Press OK. The LCD will display SUCCES. Press the
device key again to finish its setup or select another
setup option using the or the button.
• To add other devices, repeat the 3 steps above.
b. Deleting a Device
• Hold the SET key pressed for 3 seconds.
• Select DEVICE using the
or the button and press
OK.
• Select DELETE using the
or the button and press
OK.
• The LCD will display DELETEDEV. Press the device key
corresponding to the device you would like to delete. If
all devices have been deleted, the LCD will display
EMPT.
• Press OK. The LCD will display SUCCES. Press the device key again to finish the setup or select another setup option using the
or the button.

5. Device Setup

a. Device Code Assignment
Key on the Remote Device
TV Television set
VCR Video recorder
DVB Satellite cable DVB
DVD DVD or digital video recorder
TUNER Radio
TAPE Tape receiver
CD CD player
AUX Amplifier, LD or video CD
VRC1601D
Initial Code Total of Codes
048 488
075 182
075 403
026 190
039 114
067 134
035 124
032 204
4 VELLEMAN