Option: Docking Buffers - Novoferm NovoDock L530i Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

7.3
Instruction
Paint the welded seams with the touch-up paint included in the scope of supply in order to prevent rust formation.
The front plate shown in 6.8 may not be required in combination with certain options. When docking buffers are installed,
the front plate shown in figure 6.8 is not used. Depending on the design, the docking buffer plate included in the scope of
supply should be welded in place. Please refer to the corresponding assembly instructions for this.
General instruction: The image may differ at detail level.
Docking buffers (not included in the leveller scope of supply).
Protect the docking platform and vehicles with suitable docking buffers. Docking forces in excess of 100 kN may require
special measures. Please ask your supplier or the manufacturer.
This installation manual must be given to the customer and kept safely during the entire period of use!
II
8. Optional buffers
EN
11

Publicidad

Tabla de contenido
loading

Tabla de contenido