Olympia A 235 Plus Instrucciones De Uso página 15

WARNING!
• Danger of injury due to the feed mechanism.
Loose objects can get caught in the feed side of the laminator and cause
injuries.
Keep fingers, hair, scarves, ties, jewellery etc. well away from the feed
side.
CAUTION!
• Danger of burns due to hot machine surface!
During hot laminating, the machine surface heats up.
Do not touch the machine surface while the laminator is in operation.
Wait a few minutes after laminating until the machine has cooled down
before you touch it.
CAUTION!
• Danger of tripping due to incorrectly laid cable!
Lay cables in such a way that nobody can trip over them.
Make sure the plug and cable cannot be damaged.
ATTENTION!
• Material damage!
Avoid exposing the device to environmental influences such as smoke,
dust, vibration, chemicals, moisture, heat or direct sunlight.
Only use the laminator in the ambient conditions stipulated in Section
"Technical Data".
Do not laminate metallic materials.
Always use cold lamination for heat-sensitive materials.
Ensure only qualified personnel perform repairs.
Laminator A 235 Plus
Safety Information
15