Setting Date And Time; Setting The Time Format 24H/12H; Setting The Alarm Function; Setting The Timer - Soehnle Page Meteo Center Manual Del Usuario

7. 2 Setting date and time

GB
After setting the weather forecast the integrated radio clock
attempt to capture (about 10 minutes) the time signal (Date and
time). Could the time signal be detected,
manently.
If the time signal cannot be received or in case of poor recepti-
on,
at a different location. The device attempts to receive the time
signal for 10 minutes every hour, until it has been received.
In normal operation the time is synchronized with the time
signal daily at 2 a.m., 3 a.m., 8 a.m., 2 p.m. und 8 p.m.
Alternatively, the clock can also be set manually.
1. Push and hold the SET key for 2 seconds.
2. Set the year using the UP/DOWN key. Confirm using the SET
key.
3. Set month/day and confirm.
4. Set time (hours/minutes) and confirm.
7.3 Setting the time format 24 h / 12 h
Push and hold the UP key for 2 seconds to change the time for-
mat.

7.4 Setting the alarm function

1. Push the MODE key repeatedly until the alarm time is displayed
2. Then hold the SET key for 2 seconds until the alarm time flashes.
3. Use the UP/DOWN key to set the hours, use SET to confirm.
4. Use the UP/DOWN key to set the minutes, use SET to confirm.
5. The
The alarm function can be deactivated by pushing the UP key.
Snooze function: to pause the alarm signal for 5 minutes, push
the

7.5 Setting the timer

1. Push and hold the
2. Set alarm time using the
3. Use the
4. Use the
14
is displayed. In this case we recommend placing the scale
symbol indicates that the alarm has been activated.
key.
key to start the timer.
key or the
key for 2 seconds.
key.
key to stop the alarm signal.
is displayed per-