Velleman CAMSCB2 Manual De Instrucciones

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the CAMSCB2! If the device was damaged in transit, contact your dealer. Verify if all parts are
included: a camera, a hex wrench, a CS-C adapter ring, an Auto Iris lens connector and an instruction manual.
2. Features
• Horizontal resolution of 380 TV lines
• Built-in Auto Electronic Shutter (AES)
• Minimum illumination of 0.25 lux / F2.0
• Signal-to-noise ratio of 48dB
• Long life and high reliability
3. Controls and Connectors
1. Flange ring
Suitable for CS-mounted lenses. To install a C-mounted lens, use a CS-C conversion ring.
2. Flange ring fixation screw
The camera is set at a standard focal position. Depending on the type of lens, a slight adjustment may be
necessary. Adjust the back focus lens by turning the focusing knob.
3. Auto iris lens connector
Supplies power and control signals to the auto iris lens (when mounted).
4. DC drive level adjustment
Adjust the DC drive level for the brightness of the video output when using a Direct Drive lens.
5. Power LED
Indicates normal operation.
6. 12VDC input terminal
To connect the 12VDC regulated power supply.
7. Video output connector (VIDEO OUT)
To connect the camera to the VIDEO IN connector of the monitor
CAMSCB2
CAMSCB2 – B/W CCD CAMERA
(fig. 1)
1 VELLEMAN