babymoov Babyphone Slim Manual De Instrucciones página 14

Alarm out-of-range
setting (see details
below this table)
Maximum
temperature
alarm setting
Minimum
temperature
alarm setting
Normal screen
* It is recommended to set a temperature difference of ± 5 °C between the maximum and minimum limits
relative to the current temperature, because otherwise the temperature alarm will go off easily whenever
there is even a slight change in the temperature in baby's room.
Power output setting
Hi - High power
EL - Extra low power
16
Use selection button (2) to chose On or
oFF and press the mode button (3) to
validate your choice.
BABYPHONE SLIM • Instruction manual
Use the selection button (12) to chose the
same setting as on the transmitter, and
press the mode button (13) to validate
your choice.
Use the selection button (12) to choose the
maximum temperature (between -3 °C
and +49 °C) above which the receiver will
trigger an alarm. If the oFF setting is
selected, no maximum temperature limit
will be active. Press the mode button (13)
to validate your choice.
Use the selection button (12) to choose the
minimum temperature (between -8 °C and
+44 °C) below which the receiver will
trigger an alarm.
If your selection is illogical (for example you
choose 15 °C for the maximum limit and 23
°C for the minimum limit) the receiver will
refuse your choice and will correct it
automatically to a value 2 °C below the
maximum limit (in this case 13 °C). If the
oFF setting is selected, no minimum
temperature limit will be active. Press the
mode button (13) to validate your choice*.