Irc-6 (Infrared Remote Control 6) Operation - Chauvet DJ GigBAR 2.0 Manual Del Usuario

IRC-6 (Infrared Remote Control 6) Operation

Note: Make sure to point the IRC-6 directly at the receiver on the product.
GigBAR 2.0 User Manual Rev. 2
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
·
Press and hold <AUTO> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
·
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press and hold <SOUND> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
Strobe Modes
To adjust the strobe program and rate:
·
Press and hold <STROBE> on the IRC-6.
·
Press <0> to Strobe All, or any number between <0> and <9> to choose your auto
program.
·
Press <+> or <–> to increase or decrease the strobe rate.
·
Press <STROBE> again to turn off the strobe.
Program Modes Defined
Button Auto Mode
<0> AM01
<1> AP01
<2> AP02
<3> AK01
<4>
AL01
<5> APK1
<6> APL1
<7> AKL1
<8> APKL
<9> AKLS
Miscellaneous Operation
To adjust the fade rate of the Par and Derby color output:
·
Press and hold <FADE> on the IRC-6.
·
Press <+> or <–> to increase or decrease the fade rate.
To adjust the brightness of color or strobe:
·
Press <%> on the IRC-6.
1 x Press
100%
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed
again.
Sound Mode
SM01
SP01
SP02
SK01
SL01
SPK1
SPL1
SKL1
SPKL
SKLS
2 x Press 3 x Press
75% 50%
Strobe Mode
All strobe White
Strobe White 1
Strobe White 2
Strobe White 3
Strobe White 4
Strobe White 5
Strobe UV 1
Strobe UV 2
Strobe UV 3
Strobe UV 4
4 x Press 5 x Press
25% 0%
Page 31 of 156