Speaker Placement - Harman Kardon HKTS 65BQ Manual De Instrucciones

HKTS 65BQ
Transmitter Unit
DC 5V
Power
Connector
Power connector: Plug the transmitter power supply into this connector and into a
working AC outlet.
Wireless Code switch: This switch selects between four different channels for the
wireless signal.
IMPORTANT: Be sure to set the transmitter unit's Wireless Code switch to the same
channel that you set the subwoofer's Wireless Code switch. See Wireless Code Settings,
on page 10, for more information.
Input connectors: Connect the supplied LFE cable from your receiver's or processor's
subwoofer output to either of the transmitter unit's Input connectors.
Color-Coding System
The HKTS 65 system uses the channel color-coding system established by the CEA to
make setting up your home theater speaker system as easy as possible. The system
includes speaker wires and an LFE cable with color bands on each end.
Speaker Position
Front Left
Front Right
Center
Surround Left
Surround Right
Subwoofer
4
WIRELESS
CODE
R INPUT L
1 2 3 4
Wireless Input
Code Connectors
Switch
Wire Color Bands
White
Red
Green
Blue
Gray
Purple
Subwoofer Rear-Panel Controls and Connections (cont.),
Color-Coding System, and Speaker Placement

Speaker Placement

Front speakers
Front Left
Speaker
Place the front speakers the same distance from each other as they are from the listener's
position. Place them at about the same height from the floor as the listener's ears will be.
Angling them towards the listener can improve the stereo imaging.
Center Speaker
Front Left
Speaker
Place the center speaker directly above or below the center of your TV screen. Its center
should be no more than two feet (61cm) above or below the centers of the front left and
front right speakers. If your TV set is deep enough, it may be convenient to set the center
speaker on top of the television set.
Front Right
Speaker
Center Speaker
0 – 2 ft
(0 – 61cm)
Front Right
Speaker