Setting Up For Installation - Dalla Corte dc one Guia Del Usuario

GCS
Grinder Contro l
S yste m
GCS (Grinder Control System)
This coffee grinder is equipped with an electro-
nic control system for the digital programming
of grinding time and grind fineness. Moreover,
it can be adjusted automatically by connecting
it to Dalla Corte EVOLUTION or DC-PRO coffee
machines through a serial cable.

setting up for installation

WARNING
The installation must be carried out in com-
pliance with laws in force, following the
manufacturer's instructions and by qualified
professionals only. A wrong installation of
the appliance can damage people, animals
and things. The manufacturer cannot be
held responsible for damages caused by a
wrong installation.
The appliance shall be installed next to the cof-
fee machine on a stable and safe bearing surface
(30 x 40 cm) and a minimum clearance of 70 cm
shall be left above it. A 10-16 amp, single-phase
power socket compliant with local laws must
also be present.
After unpacking the appliance, check it is unda-
maged and that no parts are missing. If you are
in any doubt, do not use it.
Packing elements shall never be left within re-
ach of children, since they are potentially dan-
gerous.
This system controls and adjusts coffee grind
fineness by means of the espresso machine.
The machine monitors every coffee extraction: if
extraction parameters do not correspond to the
set ones, it sends the coffee grinder an order to
modify grind fineness and grinding time.
Before plugging the appliance into the electric
system, check that technical data on the identi-
fication plate match with those of the installation
place.
In case it is necessary to change the appliance
power cable, consult the appliance installer.
Bearing surface