Reinforcing the bass
You can reinforce the bass sound.
Press the S.BASS button.
To cancel the effect, press the S.BASS button again.
o When the LOUDNESS function is set to on, the S.BASS function is
set to off automatically.
Loudness
The loudness of high and low frequency sound is reduced at low
volume. To supplement this hearing loss, turn the loudness function
on. Set this function to off when listening at normal levels.
Press the LOUDNESS button.
To cancel the effect, press the LOUDNESS button again.
o When the LOUDNESS function is on, the bass and treble sound
level automatically set to "0". If you want to change the bass and/or
treble sound level, turn the LOUDNESS function off.
o When the S.BASS function is set to on, the LOUDNESS function is
set to off automatically.
Adjusting the bass and treble
You can change the bass and treble sound between "–5" to "+5".
o If the LOUDNESS function is on, press the LOUDNESS button to
turn it off. (When the LOUDNESS function is on, the bass and treble
sound level automatically set to "0".)
Press the TONE button repeatedly to select Bass or Treble.
And within 5 seconds, press the VOLUME buttons to adjust the
sound level.
The higher the treble number, the more the high frequencies are
emphasized.
The higher the bass number, the more the low frequencies are
emphasized.
Getting Started with an iPod
Setting the dock adapter
1
Select the dock adapter that fits your iPod.
No.4 : 20 GB + U2
iPod with click wheel 20 GB,
iPod with click wheel U2 Special Edition 20 GB,
iPod with color display 20/30 GB,
iPod with color display U2 Special Edition 20 GB,
iPod with video 30 GB,
iPod with video U2 Special Edition 30 GB,
iPod Classic 80/120 GB, 160GB (2009)
No.7 : 60GB(color) + Photo 40/60 GB
iPod with click wheel 40 GB,
iPod with color display (iPod photo) 40/60 GB,
iPod with color display 60 GB,
iPod with video 60/80 GB,
iPod Classic 160 GB (2007)
o If none of the dock adapters supplied with this unit are
compatible with your iPod, use the dock adapter that came with
the iPod or a dock adapter purchased from the Apple Store as an
optional accessory.
2
Insert the adapter into the TC-X350i dock.
Fit the front edge of the adapter into the dock, and then press
the back edge of the adapter onto the dock until a slight "click"
is heard indicating the adapter is inserted correctly.
1
o To remove the adapter, hold its left and right sides and gently
pull it up.
Compatible iPod software
If your iPod will not work with the TC-X350i or with the remote control
unit, software update might solve the problem.
or
2
15