Toto TS930A1 Manual De Instrucciones Y Del Propietario página 5

4) Slide the mounting bracket back
against the wall and tighten with
pan head screws and washers.
Secure the mounting bracket onto
the wall with mounting screws.
Slide the escutcheon toward the
wall over the mounting bracket.
FOR TS100B1/TS100B1L ONLY:
Slide the shower arm adapter
upward so that the hex nut is ac-
cessible.
Make sure that the flow regula-
tor is properly installed into the
showerhead adapter and that the
gasket is inside the hex nut.
Thread the showerhead adapter
into the hex nut until tight.
Adjust the showerhead so that the
TOTO logo is parallel to the wall
®
(slightly loosen the showerhead if
necessary), then tighten with set
screws.
Slide the shower arm adapter over
the hex nut and thread it onto the
showerhead adapter.
Installation Procedure (continued)
TS100B1
TS100B1L
Mounting
Screws
Shower
Arm
Adapter
Flow
Regulator
5
Pan
Head
Screws
Washers
Set
Screws
Hex Nut
Gasket
Showerhead
Adapter