Before Use; Cameras That Display The Settings; Cameras That Do Not Display The Settings - Canon GP-E2 Manual De Instrucciones

Introduction
The GPS Receiver GP-E2 can geotag your shots and record the route
you travel. Using the provided software Map Utility, you can view
shooting locations and the route traveled. The receiver can also set the
camera time via GPS.

Before Use

Before use, check whether your camera menu displays [GPS device
settings].
Example of menu display
EOS 5D Mark III and EOS 7D Users
If [GPS device settings] is not displayed on your EOS 5D Mark III or
EOS 7D camera, update the camera firmware to a version compatible
with the receiver. The menu item will be displayed after you update the
firmware.
For details, contact a Canon Service Center.
2

Cameras that display the settings

All features described in this manual
are supported by the receiver.
However, note that the EOS 7D does
not support recording the direction
that the receiver faces.
Cameras that do not display the
settings
Geotagging images (and adding
direction information) is not supported
while shooting.
Only the logging function (<LOG>
mode) is available. Using this
information, you can geotag images
later in Map Utility.