Canon GP-E2 Manual De Instrucciones página 51

Location Information Logs
Location information is recorded at regular intervals along the route
traveled with the receiver, as shown in the positioning interval table.
Daily logs (p.24) are saved on the receiver itself. The number of days
for which you can store logs depends on the positioning interval you
specify in [Position update timing] (p.18). Log files can be saved or
deleted using the provided software Map Utility.
When the receiver's internal memory becomes full, the oldest log files
are overwritten with new information, one by one.
Log File Capacity, by Positioning Interval
Position Update
Timing
Every second
Every 5 sec.
Every 10 sec.
Every 15 sec.
* Capacity when logging eight hours per day
When carrying the receiver in a bag or suitcase as you travel, make sure
the receiver faces upward and nothing is on top of it.
Set the camera time and date as accurately as possible. Also, on
cameras that support time zones and daylight saving time, use
appropriate settings for the shooting location.
When you use the provided software Map Utility, images are geotagged
by comparing image date/time tags to logged date and time information.
An incorrect date and time setting may prevent accurate geotagging.
Logging also enables subsequent geotagging of JPEG and RAW
images (file extension: CR2) shot with EOS DIGITAL cameras.
Movie files can also be geotagged this way at a later time, when using
cameras that display [GPS device settings] in the menu (except with
the EOS 7D).
Log Files (Approx.)
4.5 days
23 days
45 days
68 days
Logging the Route Traveled
Position Update
Timing
Every 30 sec.
Every minute
Every 2 min.
Every 5 min.
Log Files (Approx.)
128 days
128 days
128 days
128 days
17