Fein CCG18-115 BL Manual De Instrucciones página 22

OBJ_BUCH-0000000278-001.book Page 22 Monday, February 19, 2018 9:15 AM
en
22
Character Unit of measurement,
international
n /min, min
r/min
P
W
1
P
W
2
U
V
f
Hz
M... mm
Ø mm
mm
mm
mm
kg
kg
kg
L dB
pA
L
dB
wA
L dB
pCpeak
K...
2
m/s
2
m/s
h,AG
2
m/s
h,DS
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have thor-
oughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 054 06 1). The documents mentioned should be
kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial safety
regulations.
Unit of measure-
ment, national
-1
, rpm, rpm
W
W
V
Hz
mm
mm
mm
mm
mm
kg
kg
kg
dB
dB
dB
2
m/s
2
m/s
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2 2
min, m/s
Intended use of the power tool:
Hand-guided, battery-operated angle grinder for dry
grinding, wire brushing and cutting of metal and stone in
weather-protected environments with the application
tools and accessories recommended by FEIN.
Safety Warnings common for Grinding, Sanding,
Wire Brushing or Abrasive Cutting Off Operations
This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety warn-
ings, instructions, illustrations and specifications pro-
vided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
Operations such as polishing are not recommended to be
performed with this power tool. Operations for which the
power tool was not designed may create a hazard and
cause personal injury.
Explanation
Rated speed
Power input
Output
Rated voltage
Frequency
Size of metric thread
Diameter of a round part
Ø =Max. diameter of grinding/cutting disc
D
Ø =Diameter of mounting hole
H
T=Thickness of grinding/cutting disc
Ø =Max. sanding pad diameter
D
M=Thread for clamping flange
l=Length of mounting thread
Weight according to EPTA-Procedure 01
Weight of the power tool without battery and
application tool
Weight of the battery
Sound pressure level
Sound power level
Peak sound pressure level
Uncertainty
Vibrational emission value according to
EN 60745 (vector sum of three directions)
Mean vibrational value for angle grinding
Mean vibrational value for sanding with sanding
sheet
Basic and derived units of measurement from the
international system of units SI.