Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TIME AND CALENDAR SETTING
1. In normal time mode, press and hold "CLOCK" key for
2 seconds until the Year digit flashes.
2. Press "UP" or "DOWN" key to set desired value of the
flashing Year digit, press "UP" or "DOWN" key without
releasing to speed up the setting.
3. Press "CLOCK" key again until the Month digit flashes.
and press "UP"/"DOWN" key to adjust its value.
4. Repeat the above operations to set the time and
calendar in this order: Year > Month > Date > 12/24
Hour format > Hour > Minute > Second > Language
(GB/FR/DE/ES/IT/PT).
5. Press and hold "CLOCK" key for 2 seconds to save
and exit the setting, or let it exit automatically 30
seconds later without pressing any key
Normal time mode
Language setting
Second setting
Note:
When adjust the value of second, press "DOWN" / "UP"
key to clear the value to 00.
ALARM TIME SETTING
1. In normal mode, press and hold "ALARM" key for 2
seconds until Hour digit flashes.
2. Press "UP" or "DOWN" key to set the desired value,
press UP or DOWN key without releasing to speed
up the setting.
3. Press "ALARM" key until Minute digit flashes.and
press "UP"/"DOWN" key to adjust its value.
4. Press ALARM key again to save and exit the setting,
or let it exit automatically 30 seconds later without
pressing any key.
Normal time mode
Year setting
Month setting
Date setting
Hour format setting
Minute setting
Hour setting
Hour setting
Minute setting
USING ALARM AND SNOOZE FUNCTION
1. Set the alarm time as described in the above
section.
2. Slide "ALARM ON/OFF" switch to ON position to
turn on alarm function with the alarm icon "
displayed on the LCD.
3. Slide "ALARM ON/OFF" switch to OFF position to
turn off alarm function.
Note:
1. Every time the alarm is sounding, press
"SNOOZE/LIGHT" key to enter snooze mode with
the bell icon flashing, and it will sound again after
5 minutes.
2. When the alarm is sounding, the sound will keep
1 minute without any operation, and it will sound
again at the alarm time next day.
BATTERY REPLACEMENT
When the LCD becomes dim, replace with 2 new AA
size batteries at once. Pay attention to the battery
polarity.
Note
Attention! Please dispose of the used
unit or batteries in an ecologically
safe manner.
GUARANTEE
This product is guaranteed against all manufacturing
defects for 2 years from the date of purchase. If
the care advice and instructions contained in this
manual are not followed the guarantee will be
automatically void.
For this guarantee to be valid, it is necessary to
present the original receipt or invoice. Industrias
Masats S. L. U. exclusive importer.
"
Publicidad
Tabla de contenido
