User manual: PressoMassaggio
Instructions for use, applicators with 4 chambers
IMPORTANT NOTE
may vary depending on the purchased model.
1. Connect the line(s) of the connector(s) to the applicator(s) that you want
to use.
Choose the connector to be connected depending on the applicators you would like to
use:
• use the single connector with the abdominal/buttocks belt (Fig. A);
• use the single connector with the arm cuff (Fig. B);
• use the double connector with the leg cuffs (Fig. C following page);
• use the triple connector with both the leg cuffs and the abdominal/buttocks belt (Fig.
D following page);
Connect each nozzle (air outlet) present on the line(s) using the single, double or triple
connector hose to the relevant insert present on the applicator(s) you want to use.
Abdominal/buttocks belt
• if you only want to use the abdominal/
buttocks belt, connect the nozzles pre-
sent on the single-connector (optional)
line to the inserts on the abdominal/but-
tocks belt.
IMPORTANT: once you have worn the
belt, the connector's dark gray nozzle
must be located in the lower part of the
belt (towards the groin).
Applicator
®
: the applicators and the accessories provided with the machine
Nozzle (air
outlet) on the-
connector lines
Arm cuff
• if you wish to use only the arm cuff, con-
Connector plug to
the unit
Single
connector
Fig. A
45
Insert present on
nect the nozzles located on the single
connector's line to the seats on the arm
cuff.
Applicator
English
the applicators
Connector plug
to the unit
Single
connector
Fig. B