Tabla de contenido
Publicidad
mecablitz and camera functions
Funzioni del mecablitz e della camera
mecablitz y funciones de la cámara
m
Fig. 21 / Grabado 21
TTL
mm
Auto Zoom
Please refer to the instructions concerning the
distance to the subject under 8.3! The guide
number is not displayed when the reflector is
swivelled out of its normal position.
7.4.6 Meter-Feet changeover (m - ft)
The maximum flash range indicated by the meca-
blitz LC display can be either in meter (m) or feet
(ft). To change between the two, proceed in the
following manner:
• Turn off the mecablitz by its main switch.
• Keep the „Select" key combination depressed
(=„Mode" key + „Zoom" key).
• Turn on the mecablitz by its main switch.
• Release the „Select" key combination (=„Mode"
key + „Zoom" key).
• The flash range indication changes from m to ft
or from ft to m.
7.5 LC display illumination
Keep the „Mode" or „Zoom" key depressed for
approx. 10 sec. to activate the mecablitz LC dis-
play illumination. The LC display illumination is
switched off when a flash is triggered.
The settings on the mecablitz are not chang-
ed when the above keys are pressed for the
first time!
If the shot was correctly exposed in TTL flash
mode, then the LC display illumination will be
activated during „o.k." display (see 4.1.3).
7.6 Motor zoom reflector
The reflector of the mecablitz provides full light
coverage for lenses of 28 mm focal length and
longer (35 mm format).
7.6.1 Automatic zoom mode „Auto-Zoom"
(Fig. 21)
If the mecablitz is operated with a camera and an
AF lens that transmit the focal length data to the
flash unit, then the zoom reflector position will be
automatically adapted to the focal length of the
lens. When the mecablitz is turned on, the LC dis-
play will indicate „Auto Zoom" and the current re-
flector position.
Automatic reflector adaptation commences with
lenses of 28 mm focal length. If a focal length
shorter than 28 mm is used, then the „28" indicat-
ed on the LC display will start to flash as an indi-
48
Publicidad
Tabla de contenido
