Publicidad
Idiomas disponibles
Idiomas disponibles
exposed to rain, water or dampness (for example, the bathroom, laundry etc).
On no account should fluids be absorbed. The appliance must not be used in
potentially dangerous surroundings, for example, in the vicinity of gas plants, oil
tanks, chemicals and other inflammable and explosive materials; neither should
this appliance be used for the removal of ash, burning cigarettes or matches –
danger of fire.
Do not use this product to remove flammable or volatile liquids
such as gasoline, kerosene, paint, cleaner, alcohol, perfume, carpet, floor cleaner,
etc. use. Do not use this product to remove paint powder or toner in the laser
printer or copier so as to avoid fire or explosion.
VI. Further Points:
This appliance may be used by children from the age of 8 years, as well as
by people of reduced physical, sensory or mental capabilities or lacking
in experience and knowledge, provided they are supervised or have been
instructed with regard to the safe use of the appliance and understand the
possible resulting dangers. Children must not play with the appliance.
Cleaning and user maintenance must not be carried out by children
without supervision.
USER MANUAL
Affixing the charging station: If you do not want to affix the charging station to the wall, you can of course
simply place the charging station on the ground.
1.
Hold the charging station in the desired position on the wall and mark the drill holes with a pencil (Illu. 1).
Drill three holes with an electric drill with 6mm insert.
2.
Insert the dowels (not included in the delivery contents) into the mounting holes and fasten the charging
station to the wall with screws (Illu. 2).
3.
Slide the tube or brush brackets into the recess provided as shown in Illu.. 7. Make sure that the two longer
brackets are fastened at the top.
4.
Insert the replacement battery (not included in delivery contents) into the charging slot (Illu. 3).
5.
Insert the handset into the charging point and bring the battery into contact with the charging point guide
(Illu. 4).
6.
Insert the adapter plug as shown in (Illu. 5).
1. Connecting the charging station: connect the charging station to the power grid
2. Charging station: plug the spare battery (not included in delivery contents) and the handset into the device
– see Fig. 5; the red charging indicator starts flashing. When the battery in the vacuum cleaner is fully charged,
the replacement battery begins to charge and the red light at the charging point starts to flash.
The blue bars on the vacuum display indicate the current charge status. The charging process is complete
when all bars are blue.
If the charge indicator turns green after 5 hours, it means that both batteries are fully charged.
Precautions on Use
•
Please use the vacuum cleaner twice before charging for five hours, aim: full activation of the battery activity
•
If the battery voltage drops, the first of the four LEDs will flash, indicating that the battery needs to be
recharged soon.
•
Device not used for a long time, the battery reduces its activity; Please recharge once or twice every six months.
3. Tube Connection:
Insert the aluminum tube into the appliance (Illu. 8), holding the two pins corresponding to the two holes on
the appliance, then firmly secure the aluminum tube.
M17133_Livington_PrimeULTIMATE_Manual_Ab MP13687_20181123_BA.indd 13
13
23.11.18 10:11
Publicidad
