Scope Of Application; Device Elements - Buhnen HB 220 Instrucciones De Servicio

General
1 General
Before first operating the HB 220 adhesive pistol, please read this operating
manual carefully and thoroughly through. Please pay special attention to the
safety information in chapter 2.
This operating manual must be available to every user.
All position numbers stated in this operating manual (e.g. "nozzle (1)") apply
to the figure on page 2.
1.1

Scope of application

The HB 220 is intended for use with hot-melt adhesive in candle form
(correct intended use).
Any other usage is unauthorized.
1.2 Specifications
Description
Included in delivery
Dimensions [mm]
Weight [g]
Operational voltage [V AC]
Power consumption [W]
Insulating Class
Safety class
Working temperature [°C]
Controller
Adhesive
Adhesive performance [kg/h*]
* depending on temperature and adhesive viscosity
1.3

Device elements

HB 220
adhesive pistol, screwdriver, spare nozzle,
operating manual
290 x 230 x 55
600
220...240, 50 Hz
220
1
IP20
140...220, preset to 180...190
bimetallic temperature regulator
BÜHNEN hot-melt adhesive in candle form,
Ø 12 mm
0,7...1,2
1 Melt nozzle
2
Stand
3
Temperature setting
4 Trigger
5
On/off switch
6
Power cable
7 Setting screw stroke limit
7a
Locknut stroke limit
8
Insulation socket
9 Screwdriver (included)
8
GB