Usb Playback - Roadstar RCR-3650UMP Manual De Instrucciones

3 English
ly.
7. Press the STOP/EJ BUTTON (9) when finished. Press again to open the cassette door
after the tape spools stop turning.
CD PLAYBACK
1. Press ON/OFF/FUNCTION BUTTON (16) to turn the unit ON. Press ON/OFF/
FUNCTION BUTTON (16) repeatedly to select CD mode. "CD" will be shown on the di-
splay.
2. Open the CD DOOR (15) and place a CD/MP3 disc with the label up on the CD com-
partment. Close the CD DOOR (15).
3. Focus search is performed if disc is inside. Total number of tracks is read and appears
on the display. Playback will start automatically from the first track.
4. Press SKIP+/- BUTTON (2)/(3) to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
5. Press the PLAY/PAUSE/SCAN BUTTON (6) again when you want to stop playback tem-
porarily.
6. Press the M+/EQ/FOLDER BUTTON (4) when finished.
REPEAT / RANDOM MODE
Press the M-/MODE/CLOCK BUTTON (5) before or during playing CD / MP3 disc, each
press switches the mode function as follows:
1. REPEAT 1: the current track will be played over an over again till you press STOP/
MEMO/SLEEP BUTTON (7).
2. REPEAT ALL: all tracks on the disc will be played over and over again till you press
STOP/MEMO/SLEEP BUTTON (7).
3. RANDOM: the random play will start from next track automatically.
4. NORMAL MODE.

USB PLAYBACK

1. Plug or slot in USB device to the USB SOCKET (1).
2. Press ON/OFF/FUNCTION BUTTON (16) to turn the unit ON. Press ON/OFF/
FUNCTION BUTTON (16) repeatedly to select USB mode. "USB" will be shown on the
display.
3. Playback will start automatically from the first track.
4. Press SKIP+/- BUTTON (2)/(3) to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
5. Press M+/EQ/FOLDER BUTTON (4) repeatedly to select the desired folder.
6. Press the STOP/MEMO/SLEEP BUTTON (7) when finished.
The operation of PROGRAM, MODE are as the same as that of CD/MP3. Please refer to
CD/MP3 OPERATION.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device like MP3
players, CD players and allow playback of your external source through the system spea-
kers.
1. Use an audio cable (not included) with 3.5 mm stereo plugs on each end of the cable.
Plug one end into the AUX-IN jack on the main unit and plug the other end of the cable
into the LINE OUT or HEADPHONE Jack of your external audio device.
2. Turn ON the unit and your external audio device. Press ON/OFF/FUNCTION BUTTON
(16) repeatedly to select AUX-IN mode. "AUX" will be shown on the display.