Mercedes-Benz XENTRY Kit Guia Del Usuario página 50

Tabla de contenido

Publicidad

Other Remote Uses. You may allow any number of
devices to access the software for purposes other
than those described in the Device Connections and
Remote Access Technologies sections above, such as
to synchronize data between devices.
e. Font Components. While the software is running, you
may use its fonts to display and print content. You may
only Benutzerleitfaden Daimler AG Stand: 08/2012
XENTRY Kit, XENTRY Kit MT, XENTRY Connect Art.Nr.
6511 9510 00 Seite 74
• embed fonts in content as permitted by the
embedding restrictions in the fonts; and
• temporarily download them to a printer or other
output device to print content.
f. Icons, images and sounds. While the software is
running, you may use but not share its icons, images,
sounds, and media.
3. VHD BOOT. Additional copies of the software created
using the software's Virtual Hard Disk functionality ("VHD
Image") may be pre-installed on the physical hard disk
of the device. These VHD Images may only be used for
maintaining or updating the software installed on the
physical hard disk or drive. If the VHD Image is the only
software on your device, it may be used as the primary
operating system but all other copies of the VHD Image
may only be used for maintenance and updating.
4. POTENTIALLY UNWANTED SOFTWARE. The software
may include Windows Defender. If Windows Defender is
turned on, it will search this device for "spyware," "ad-
ware" and other potentially unwanted software. If it finds
potentially unwanted software, the software will ask you if
you want to ignore, disable (quarantine) or remove it. Any
potentially unwanted software rated "high" or "severe,"
will be automatically removed after scanning unless you
change the default setting. Removing or disabling poten-
tially unwanted software may result in
• Other software on your device ceasing to work, or
• Your breaching a license to use other software on this
device
By using this software , it is possible that you will also re-
move or disable software that is not potentially unwanted
software.
5. SCOPE OF LICENSE. The software is licensed, not sold.
This agreement only gives you some rights to use the
software. Daimler AG and Microsoft reserve all other
rights. Unless applicable law gives you more rights
despite this limitation, you may use the software only
as expressly permitted in this agreement. In doing so,
you must comply with any technical limitations in the
software that allow you to use it only in certain ways. For
more information, see the software documentation or
contact Daimler AG. You may not:
50
• work around any technical limitations in the software;
• reverse engineer, decompile or disassemble the soft-
ware;
• make more copies of the software than specified in
this agreement;
• publish the software for others to copy;
• rent, lease or lend the software; or
• use the software for commercial software hosting
services.
Except as expressly provided in this agreement, rights to
access the software on this device do not give you any
right to implement Microsoft patents or other Microsoft
intellectual property in software or devices that access
this device.
6. INTERNET-BASED SERVICES. Microsoft provides
Internet-based services with the software. Microsoft may
change or cancel them at any time.
a. Consent for Internet-Based Services. The device
may contain one or more of the software features
described below. These features connect to Mi-
crosoft or service provider computer systems over
the Internet. In some cases, you will not receive a
separate notice when they connect. For more infor-
mation about these features, visit go.microsoft.com/
fwlink/?linkid=104604. By using these features, you
consent to the transmission of this information. Micro-
soft does not use the information to identify or con-
tact you. Computer Information. The following features
use Internet protocols, which send to the appropriate
systems computer information, such as your Internet
protocol address, the type of operating system and
browser, the name and version of the software you are
using, and the language code of the device where you
installed the software. Microsoft uses this information
to make the Internet-based services available to you.
Daimler AG has elected to turn on the following featu-
res on the device.
• Plug and Play and Plug and Play Extensions. You
may connect new hardware to your device. Your devi-
ce may not have the drivers needed to communicate
with that hardware. If so, the update feature of the
software can obtain the correct driver from Microsoft
and install it on your device.
• Web Content Features. Features in the software
can retrieve related content from Microsoft and
provide it to you. Examples of these features are clip
art, templates, online training, online assistance and
Appshelp. You may choose to switch them off or not
use them.
• Digital Certificates. The software uses x.509 version
3 digital certificates. These digital certificates confirm
the identity of user sending information to each other
and allow you to encrypt the information. The software

Publicidad

Tabla de contenido
loading

Productos relacionados para Mercedes-Benz XENTRY Kit

Este manual también es adecuado para:

Xentry kit mtXentry connect

Tabla de contenido